Pagina 1 din 7 1234567 UltimulUltimul
Rezultate 1 la 10 din 68

Subiect: Paharul Vietii 2 - pentru muschi si partea inferioara a corpului

  1. #1
    Senior Member
    Data înscrierii
    10.10.2011
    Locație
    CRAIOVA
    Posturi
    72.079

    Paharul Vietii 2 - pentru muschi si partea inferioara a corpului

    [20:39, 22.03.2020] Adrian Pop: asta-i pt etapa 2, cand virusul trece in muschi si-n partea inferioara a corpului, de la cap si plamani
    [20:39, 22.03.2020] Adrian Pop: alt Gans este nevoie



    Ultima modificare făcută de Adrian Pop; Săptămâna trecută la 17:12.

  2. #2
    Senior Member
    Data înscrierii
    10.10.2011
    Locație
    CRAIOVA
    Posturi
    72.079
    Rusalin Paiusan, [22.03.20 19:41]
    Mersi de confirmare, Dane

    Balis Dan Constantin, [22.03.20 19:41]
    ��

    Balis Dan Constantin, [22.03.20 19:42]
    [Mesaj vocal: fișier necunoscut]

    Adrian Pop, [22.03.20 19:44]
    nevoia ne va invata ce trebuie să facem în această locație ...

    Carolina De Roose, [22.03.20 20:16]
    Bine ați venit Adrian Văd că ați reușit să intrați în grup
    Vă rugăm să invitați toți solicitanții noștri de cunoștințe și împărtășiți cunoștințele cu dragoste și grijă

    Babelgram, [22.03.20 20:25]
    [Ca răspuns la Marius Paraschiv]
    D Adrian, în limba română se poate scrie Scrie Sau engleza, botul Bubblegram în traducerea ambelei limbi.

    Adrian Pop, [22.03.20 20:31]
    / enable en ro - e3ste corect asa?

    Carolina De Roose, [22.03.20 20:32]
    Vă rugăm să vă puneți botul de traducere pentru a putea urma mulțumiri

    Carolina De Roose, [22.03.20 20:38]
    [Foto]

    Carolina De Roose, [22.03.20 20:42]
    Vă rugăm să ascultați platforma publică de predare din vineri în portugheză, ea este tradusă în engleză

    Rusalin Paiusan, [22.03.20 19:41]
    Mersi de confirmare,Dane


    Balis Dan Constantin, [22.03.20 19:41]
    ��


    Balis Dan Constantin, [22.03.20 19:42]
    [ Voice message : Unknown File ]


    Adrian Pop, [22.03.20 19:44]
    nevoia ne va invata ce trebuie sa facem in aceasta locatie....


    Carolina De Roose, [22.03.20 20:16]
    Welcome Adrian I see you managed to get into the group
    Please invite all our knowledge seekers and share knowledge with love and care thanks


    Babelgram, [22.03.20 20:25]
    [In reply to Marius Paraschiv]
    D Adrian, în română puteti Scrie Sau engleza, Botul Bubblegram acesta în traduce ambele Limbi.


    Adrian Pop, [22.03.20 20:31]
    /enable en ro - e3ste corect asa ?


    Carolina De Roose, [22.03.20 20:32]
    Can you all please put your translation bot on so we can follow thanks


    Carolina De Roose, [22.03.20 20:38]
    [ Photo ]


    Carolina De Roose, [22.03.20 20:42]
    Please listen to the public teaching platform from Friday Portuguese it is translated into English

  3. #3
    Senior Member
    Data înscrierii
    10.10.2011
    Locație
    CRAIOVA
    Posturi
    72.079
    https://www.youtube.com/watch?v=lCfv...ature=youtu.be

    [20:56, 22.03.2020] Marian Obada: Vad ca este tablita de cu nu zn !
    [20:56, 22.03.2020] Adrian Pop: da

  4. #4
    Senior Member
    Data înscrierii
    10.10.2011
    Locație
    CRAIOVA
    Posturi
    72.079
    Alina, o sa fie nevoie de tine unde am intrat acum. In Giani sa ai incredere, ca este apreciat si el de d-na Keshe. Aici este si marius, nou venit printre noi...dar are o capacitate aparte de lucru. Daca ramane cuplat cu noi, vom face treaba extrem de buna. In grupul Keshe mondial, o sa implementam filosofia Zalmoxiana si de-aia spun ca este nevoie de tine acolo

  5. #5

  6. #6

  7. #7
    Senior Member
    Data înscrierii
    10.10.2011
    Locație
    CRAIOVA
    Posturi
    72.079
    Second Cup of Life - New mutation Corona Virus

    This is the approved revision of this page, as well as being the most recent.

    The First One Cup One Life works on the white tissues of the lungs and brain.
    Don't stop to do the check with Plasma Water from the One Cup One Life. Spraying the body from top to toe and wait 15 minutes. If no reaction of discomfort or pain, or headache appearing or pressure, you are still free of the virus. And do the 10 seconds nose and breathing test. If you can't hold the breath for 10 seconds and the caughting starts, you are most probably infected.
    Contents

    [hide]



    The Second Cup of Life

    Second Cup of Life: Production and Application, Prevention.
    Reversal of the Corona Virus - Not by killing, through depleting it from its energy, as higher field strength gives to the lower field strength - That is the Universal Law: The more you give the more you receive
    The Second Cup of Life will work on the red tissues of the stomach and down the body.
    Therefore we have to make a new Second Cup of Life. You carry on applying the First One Cup One Life application as previously outlined.
    Application of the Second Cup of Life is to produce the field strength to stand at the same level as the mutation of the Corona Virus in the red tissues.
    Therefore we are producing the Second Cup of Life and the application that starts from under the breast. It will cover the heart tissues downward to the diaphragm, to the complete intestines and the legs. Under no circumstances DO NOT apply to the lungs and DO NOT apply on the head.
    Make sure at all times there is no GANS particles present in the water, unless explained differently.
    Production of the second Cup of Life

    Required equipment

    In this picture you can see all the equipment and already prepared materials you need for the assembly of the Second Cup of Life and the production of the GANS and the Plasma Water. In the following you will find all materials, pictures and the necessary steps described in detail.




    In case you have no Copper plate you can replace the bare Copper plate with flat, accordion shaped bare Copper wire.

    Gas burner, fire and tong(s)
    Three connecting wires
    Copper plate, Nano-coated Copper coil and bare Copper coil
    Tape and old battery (less energy left)
    Empty glass, tap water, table salt* and scale



  8. #8
    Senior Member
    Data înscrierii
    10.10.2011
    Locație
    CRAIOVA
    Posturi
    72.079
    Winding of the Nano-coated coil

    The Nano-coated coil is wound on a pencil like the bare Copper coil.








    Preparing the Copper plate

    You can get Copper in the hardware store, a plumbing shop, or at your home as electric wires.
    When the Copper plate is ready, it is bent at the top to hang it on the edge of the glass later.
    (In case you don't have a Copper plate you can also use a Copper wire and fold it like an accordion. Not like a coil.)












    Preparing three connection wires

    For connecting the Copper plate (the Copper wire accordion), the bare Copper coil and the Nano-coated Copper coil with a used battery, 3 connection wires are needed. For these connections stranded wires or a single solid pure Copper wire can be used. Cut the wires in 30 cm pieces. Strip off the plastic 2-5 cm on each end of each wire. (You will need one end of one wire to be stripped a little longer to connect the wider area of the Copper plate. See visualisation in following pictures in "Connecting the Copper plate". For the accordion 2-5 cm are are ok.)








    Connecting the bare Copper coil and Copper plate

    Connecting the bare Copper coil

    To connect the bare Copper coil to the connecting wire, simply twist the ends of the wires together.









  9. #9
    Senior Member
    Data înscrierii
    10.10.2011
    Locație
    CRAIOVA
    Posturi
    72.079
    Connecting the Copper plate

    To connect the Copper plate, (or accordion) with the connecting wire, use the longer stripped part of the connecting wire. Wrap it around the Copper plate as shown in the pictures and twist the Copper wire firmly together.














    Connecting the two connecting wires together

    Twist the two connecting wires from the Copper coil and Copper plate, at the opposite end together.
    (In case you work with the accordion Copper, twist this end with the connecting cable together.)








  10. #10
    Senior Member
    Data înscrierii
    10.10.2011
    Locație
    CRAIOVA
    Posturi
    72.079
    Creating the Copper bridge and connecting the Nano-coated Copper coil

    A Copper bridge is required to suspend the Nano-coated Copper coil in the middle of the glass. To do this, you bend a single strand of Copper wire into a bridge, so that it fits on the glass as shown in the picture. Next, attach by winding tightly the end of the Nano-coated Copper coil to the middle of the bridge. One end of the third stripped wire is attached by winding to one of the sides of the bridge.

















    The Nano-coated Copper coil wound around the bridge is placed in the middle of the glass. The bare Copper coil and the Copper plate (or the accordion Copper) are attached to the opposite edge of the glass, facing each other and facing inwards. The connecting wires all face one direction to be connected to the battery.

Pagina 1 din 7 1234567 UltimulUltimul

Informații subiect

Utilizatori care navighează în acest subiect

Momentan sunt 1 utilizatori care navighează în acest subiect. (0 membri și 1 vizitatori)

Marcaje

Marcaje

Permisiuni postare

  • Nu poți posta subiecte noi
  • Nu poți răspunde la subiecte
  • Nu poți adăuga atașamente
  • Nu poți edita posturile proprii
  •